Libec Swift Jib 50 Kit

Day Rate: £100

Week Rate: £400

Summary

The Swift Jib50 Kit Telescopic and Retractable Jib Arm, Tripod and Dolly from Libec includes the Swift Jib50, the T102B tripod, and the DL-8B dolly. It’s designed to be portable and easy to use. The jib has a telescopic jib arm that’s extendable to 90cm, with easy length adjustments via lock levers.

The included T102B aluminum tripod has a maximum height of 138cm and a minimum height of 68cm.

The Swift Jib50 takes just 5 to 10 minutes to set up and the arm can be retracted 30cm towards the rear of the jib using the included hexagon wrench to accommodate any scenario. No extra arms are required. Strategically placed 1/4″ and 3/8″ screw holes on the support arm and head mount platform provide ideal positioning for monitors and other equipment.

Jib arm with tripod and dolly. Max payload between 10-20Kg (dependant on arm length)

Tripod head required for camera or REMO30 for a remote head solution

Kit List

1x Libec 75mm Adapter
1x Libec Head Mounting Platform
1x Libec Inner Arm
1x Libec Inner Arm Lock A
1x Libec Inner Arm Lock B
1x Libec Main Arm
1x Libec Locking Screw for Main Arm
1x Libec Counter Arm Lock
1x Libec Counter Arm
1x Libec Inner Support Arm
1x Libec Inner Support Arm Lock
1x Libec Support Arm
1x Libec Pan Friction Knob
1x Libec Bowl Clamp
1x Libec Fixing Bolt
1x Libec Support Column
1x Libec Threaded Weight Shaft
1x Libec Hex Key Wrench
1x Libec Boom Friction Knob
1x Libec Joint Shaft Knob
1x Libec Safety Lock Lever
1x Libec Fine Tuning Weight
1x Libec T102B 1Stage Tripod
1x Libec DL-8B Dolly
2x Libec Weight Fixing Nut
3x Libec Jib bag
1x 30kg Weight kit

Features

Telescopic jib-No extra arms required
The main feature of the JB50 is its easily adjustable telescopic arm by turning the arms’ lock levers. In addition, using the supplied hexagon wrench, the arm can be slid back 30cm/12.0″ towards the rear of the jib. The JB50 is designed to accommodate every shooting scenario including small indoor and outdoor spaces for detailed and dynamic shots accompanied by a remote head
User-friendly design
1/4″ and 3/8″ screw holes are strategecally placed on the support arm and head mount platform, and this allows ideal positioning of LCD monitors. A support column is also equipped with attachments, and this allows you to attach our AS-7K accessory support on the right and left sides. Our new weight bar is designed to be used with a remote head. Control box and the HANDLE50 can be easily attached to the weight bar.

Specifications

Payload